Page 1 of 1

Help with transferring Morrowind to a new computer?

Posted: Fri Mar 04, 2011 4:42 pm
by Neetox
So I recently got a new computer and I installed Morrowind on here just because I tend to fall back on it whenever I'm bored or just feel like playing. The thing is I haven't played in a while since my old computer was in really bad shape and couldn't run it so I don't remember how I had my keys set up. I thought they would probably be saved in one of the files in the Morrowind folder but it doesn't appear to work like that.

I've copied all the files from the old folder into the new folder and my saves are all there and the game runs fine but I was wondering if there was a way to get my key configuration settings back? or will I have to rekey everything. It's probably not a big deal but I just wanna figure this out before I try. I like figuring things out but I couldn't this time. :p

Re: Help with transferring Morrowind to a new computer?

Posted: Fri Mar 04, 2011 5:32 pm
by Alu
Just when I read this, I was wondering the same and out of Curiousity looked into the Registry.
And it appears to be saved there:

HKEY_LOCAL_MACHINE
-SOFTWARE
--Bethesda Softworks
---Morrowind

Looks like there's all kind of Options in there.
Not sure how to easily/quickly transfer that Data to another Computer tho, sorry :?

Re: Help with transferring Morrowind to a new computer?

Posted: Sun Mar 06, 2011 9:17 pm
by jaxawier
my experience is that morrowind it self is free to move to other pc´s or locations on other hd´s whatever( free in that it works).
the trouble is that darned mge,find my self install that one again after a move,new windows-install etc.

or do a clean install first,good to have regardless, after the copied mw work,not sure why but it does.
haven´t exported keys from the registry for mw,in theory it should be fully possible,then just import them again just as with any other reg-files.

Re: Help with transferring Morrowind to a new computer?

Posted: Mon Mar 07, 2011 3:38 pm
by Andere
First of all, Welcome to the Forum. Say Hi at the Welcomes and Goodbyes topic, you'll probably meet some nice persons over there.

Saves should contain your keys too. It shouldn't be more difficult - hasn't been for me. Only thing I can think of is, in case you start the first save it may not contain your changes for the commands. Therefore, start a later save.

Re: Help with transferring Morrowind to a new computer?

Posted: Sun Mar 13, 2011 9:04 pm
by Neetox
Alu wrote:Just when I read this, I was wondering the same and out of Curiousity looked into the Registry.
And it appears to be saved there:

HKEY_LOCAL_MACHINE
-SOFTWARE
--Bethesda Softworks
---Morrowind

Looks like there's all kind of Options in there.
Not sure how to easily/quickly transfer that Data to another Computer tho, sorry :?
Managed to find the registry files and transferred them into the new computer but they don't seem to work. Not sure if it matters but the old computer was Windows XP and this one is Windows 7. The registries look pretty much the same so I'm not sure if they work differently or not. I'll probably end up having to reconfigure everything again lol.
jaxawier wrote:my experience is that morrowind it self is free to move to other pc´s or locations on other hd´s whatever( free in that it works).
the trouble is that darned mge,find my self install that one again after a move,new windows-install etc.

or do a clean install first,good to have regardless, after the copied mw work,not sure why but it does.
haven´t exported keys from the registry for mw,in theory it should be fully possible,then just import them again just as with any other reg-files.
That's actually what I did. Instead of moving everything from the old computer to this new one, I simply installed the game from scratch and moved my save files afterwards. Gonna try just doing a folder move and see if that does anything.
Andere wrote:First of all, Welcome to the Forum. Say Hi at the Welcomes and Goodbyes topic, you'll probably meet some nice persons over there.

Saves should contain your keys too. It shouldn't be more difficult - hasn't been for me. Only thing I can think of is, in case you start the first save it may not contain your changes for the commands. Therefore, start a later save.
Thanks for the welcome. Not a new member but thanks anyway. I mostly lurk every now and then. :p

Unfortunately, just transferring the saves over didn't work. It's not a huge deal, I just like troubleshooting things that don't go as planned so I guess I'll update this if the simple file moving worked or not.

Thanks for the responses though! Really appreciate it. :D


Edit: Well the simple move didn't work. Guess I'll just reconfigure it. Oh well! Thanks again for the suggestions. :)

Re: Help with transferring Morrowind to a new computer?

Posted: Sun Mar 13, 2011 11:44 pm
by jaxawier
Neetox wrote: Not sure if it matters but the old computer was Windows XP and this one is Windows 7.
well, don´t have 7 to test with, did a move from xp32 to xp64,erased my windows hd for the new install,as always my morrowind is on a separate hd, needed a clean install anyway,and experience tells me it probably need to be registred,so I installed everything fresh again on my windows-hd,and mge,and it worked just fine in my old mw,also have one install on an usb-disk if I travel somewhere,fine that too.
so a guess is that windows 7 changes things,interested in this in case I might upgrade to 7 my self one day.

Re: Help with transferring Morrowind to a new computer?

Posted: Mon Mar 14, 2011 1:33 pm
by Andere
Neetox wrote:Not sure if it matters but the old computer was Windows XP and this one is Windows 7. The registries look pretty much the same so I'm not sure if they work differently or not. I'll probably end up having to reconfigure everything again lol.
I believe that's precisely the thing. This could be very important information for many, as they move from XP to 7 - including me, I'm planning to go for 7 in the summer. Please try to make notes or something, I'll PM our specialist H8Ball and ask him to take a look at this topic.

No obligation here, of course, but the question may be rather important. Thanks anyway, best wishes. :)

Re: Help with transferring Morrowind to a new computer?

Posted: Wed Mar 16, 2011 9:06 pm
by H8Ball
Hi. Sorry I'm late in replying. Been working away from home for a couple of days (up in Scotland near Aberdeen) and only just arrived back today.

I have XP and haven't had much exposure to Vista/7, but I've done a bit of research and it looks like Vista/7 are using the SAME version 5.00 of the Registry Editor that ships with XP. Also, from what I've seen, the HKEY_LOCAL_MACHINE registry hive structure is unchanged. This means you should be able to use the Registry Editor on ANY of these Windows versions to export a .REG file containing HKEY_LOCAL_MACHINE data which can be imported (Merged) straight into any of the other Windows registries without any conversion issues.

Morrowind Registry Export Procedure...
Spoiler:
1. Run the Registry Editor...
a. Start > Run, enter regedit.exe
OR
b. browse to C:\WINDOWS\System32 and double-click regedit.exe

2. Browse for the Morrowind key...

HKEY_LOCAL_MACHINE
+ SOFTWARE
+ + Bethesda Softworks
+ + + Morrowind

3. Right-click the Morrowind key, select Export and enter a filename, i.e. Morrowind.reg.
Morrowind Registry Import Procedure...
Spoiler:
1. Right-click the Morrowind.reg file and select Merge.
As an example, here's my own Morrowind.reg file...
Spoiler:

Code: Select all

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\Bethesda Softworks\Morrowind]
"Installed Path"="E:\\Games\\Morrowind"
"Screen Width"=hex(0):56,05,00,00
"Screen Height"=hex(0):00,03,00,00
"Screen Depth"=dword:00000020
"Backbuffers"=dword:00000001
"Multisamples"=dword:00000000
"Fullscreen"=hex(0):01
"Pixelshader"=hex:01
"Stencil"=hex:01
"Mipmap"=hex:01
"Mipmap Skip Level"=dword:00000000
"Hardware"=hex:01
"Multipass"=hex:00
"Vertex Processing"=dword:00000000
"Swap Effect"=dword:00000001
"Refresh Rate"=hex(0):00,00,00,00
"Presentation Interval"=dword:00000000
"Adapter"=dword:00000000
"Gamma"=dword:3f8b851f
"Render Distance"=dword:45e00000
"Master Volume"=hex:fa
"Voice Volume"=hex:fa
"Effect Volume"=hex:b3
"Footsteps Volume"=hex:98
"Media Volume"=dword:3c23d70a
"3D Sound Quality"=hex(4):02
"Shadows"=dword:00000000
"Use Best Attack"=hex:01
"Quick Save Rest"=hex:00
"Help Delay"=hex:00,00,00,00
"HUD Style"=hex:00,6f,6e,00
"Menu Alpha"=hex:00,00,80,3f
"Mouse Flip Y"=hex:01
"Cursor Off"=hex:00
"AIDistance"=hex:3c,68,48,3f
"Difficulty"=hex:00,00,80,3f
"Subtitles"=hex:00
"Mouse Sensitivity"=dword:3bc49ba6
"Horizontal Sensitivity"=dword:3bc49ba6
"Controls Version"=dword:00000064
"Forward"=dword:01c90000
"Back"=dword:01d10000
"SlideLeft"=dword:01cc0000
"SlideRight"=dword:01ce0000
"Use"=dword:02010302
"Activate"=dword:02020301
"Ready Item"=dword:02050000
"Ready Magic"=dword:02040304
"Crouch/Sneak"=dword:01370305
"Run"=dword:012b0306
"Always Run"=dword:01500000
"Auto Run"=dword:00000000
"Jump"=dword:019e0307
"Next Weapon"=dword:011c0000
"Prev Weapon"=dword:011b0000
"Next Spell"=dword:02090000
"Prev Spell"=dword:020a0000
"Toggle POV"=dword:019d030a
"Menu Mode"=dword:02030000
"Journal"=dword:01100308
"Rest"=dword:01540309
"Quick Menu"=dword:013c0000
"Quick1"=dword:01030000
"Quick2"=dword:01040000
"Quick3"=dword:01050000
"Quick4"=dword:01060000
"Quick5"=dword:01070000
"Quick6"=dword:01080000
"Quick7"=dword:01090000
"Quick8"=dword:010a0000
"Quick9"=dword:010b0000
"Quick10"=dword:010c0000
"QuickSave"=dword:01200000
"QuickLoad"=dword:01270000
"Last Keyframe Extract Time"=dword:4af5572a

[HKEY_LOCAL_MACHINE\SOFTWARE\Bethesda Softworks\Morrowind\1.00.000]
As you can see, most of the in-game options and control (mouse/keyboard) bindings are under the key path [HKEY_LOCAL_MACHINE\SOFTWARE\Bethesda Softworks\Morrowind]. The control bindings are from "Forward" to "QuickLoad", and are all 32-bit DirectInput scan codes (those starting with 01 are for keyboard, and starting with 02 for mouse). The rest are in-game options, some obvious, others which can be figured out with a little logical deduction. The only snag is the numbering system, which is hexadecimal (base 16), but you can use the Windows Calculator in Scientific Mode to convert from hex to decimal and vice versa.

The handiest thing about exporting to a .REG file is that it keeps a record (backup copy) of your in-game options. This saves you having to run the game to view them and write them down, which you couldn't do anyway if the game is in such a corrupted state that you can't even run it to VIEW the options! If you ever need to reinstall the game, just Merge (restore) afterwards from the .REG file rather than laboriously setting up the options from scratch in-game. You can have the game reconfigured exactly as before in one fell swoop, BEFORE you even run it!

Same principle applies to your Morrowind folder. If you back up the WHOLE thing, and copy the .REG file in there as well, you have a means of easily and quickly reinstalling the ENTIRE game from scratch (including ALL patches, mods and their load order, associated textures/meshes/sounds, etc). NO messing about with reinstalling the game, reconfiguring in-game options, then spending DAYS (even WEEKS) reinstalling mods and setting their correct load order one by one (highly complex and error prone). Just reinstall the game, copy the backup Morrowind folder back in over the top, then Merge the .REG file. Back up and running in EXACTLY the same "game state" as before in about 20 minutes flat!

I use this backup strategy with both Morrowind AND Oblivion. Once I have them working perfectly with all patches and mods, etc, I do a complete copy of their main folders and any config files (preferably to a different hard disk in case the one they're on ever fails). They're both such complex games to set up for your exact configuration and unique list of mods that keeping a complete backup of the "game state" is the best way to go. It wastes a lot of disk space, but a good "redundancy" strategy is well worth it.

I do the same thing with ALL of my games, although usually NOT complete backups because they're typically a LOT less complex to configure than Morrowind or Oblivion. In most cases, only a partial backup of key files and folders (typically a few config files and the saved games folder) is necessary to get them back to exactly the same game state as before a reinstall. In all cases, the aim is the same, reconfigure and re-tweak after reinstall with the absolute minimum of messing about and loss of time.

Hope this helps. :wink:

Re: Help with transferring Morrowind to a new computer?

Posted: Fri Mar 18, 2011 5:50 am
by jaxawier
H8Ball:
thanks a lot, oldies like me hesitate in going up and forward regarding OS´s,afraid my games get mucked up,so this helped a lot :D

Re: Help with transferring Morrowind to a new computer?

Posted: Wed Mar 30, 2011 7:41 pm
by Neetox
@H8Ball: That's exactly what I did. The registry merging was successful but when I went to try it out ingame, nothing was changed. Anyway, just went ahead and set up my keys manually. :p

Perhaps it can't be done when swapping from 32 bit Windows XP to 64 bit Windows 7? This is my first time using Windows 7 so I wouldn't know much about it anyway. Least I can play it! :D